Hive OS client for ASICs
Hiveon ASIC Firmware
Hive OS Drive Flashing UtilityHive OS Drive Flashing Utility
GPU Rigs Disk Image
Etcher is a recommended tool to write Hive images on the drives. It supports Windows, Mac, Linux. It can write unpacked ZIP archive as well.
Alternatively you can use Rufus as an image writing tool.
After the image is flashed you will discover newly created drive in your system where you will be able to precreate
rig.conf with worker's ID and password or FARM_HASH. Please find rig-config-example.txt on HIVE drive. The ready
rig.conf file can be downloaded from the rig’s settings.
Advanced Unix (Linux or Mac) users can use
dd to write RAW image to disk. Something like
dd if=hive-xxx.img of=/dev/sdb bs=10M status=progress. But be careful finding out output disk "of", use
fdisk -l to list your partitions.
SSDs are much more reliable and advised to use in production environments. If you want to prolong the life of your USB flash drive please run
logs-off after installation.
Common booting problems forum thread.
To the worker
Default login is
Note: if you set your own password during the first run, you should use it instead.
If you prefer graphic UI, VNC server is there for you. Use VNC Viewer or any other VNC client to connect to your IP address vnc://192.168.0.xxx:5900.
There is a Shellinabox server running on the rig. You may open
https://192.168.0.xxx:4200/ in browser and access shell from the web.
And of course you can connect monitor to the first GPU in 16x slot if there are some serious problems.
Manage and configure each individual rig. Overclock AMD and Nvidia GPUs from the web, troubleshoot and reboot GPU errors. Perform bulk updates, pool changes or setup automatic tasks